On the document lists of the delivery list (Transaction VL04), the billing due list (Transaction VF04) and the work list for invoice lists (Transaction VF24), all items are selected when you display the list for the first time. If the user click save at the initial screen, where all items were selected, SAP will do a mass save for all the documents display on the due list. Users might feel unsecured with this features.
To change the default selection, refer to R/3 note no. 16711. However, it seems that the note have been removed from OSS.
Here is an extract of the remove note 16711.
If you do not want the list to be predefined with selections, you can carry out one or both of the modifications described in the attachment in your system.
o The modifications to objects MV50SFS0 and MV50SFZC (the latter only Release 3.1I to 4.5B) are relevant for the delivery list VL04
o For the billing due list and the work list for invoice lists,
make the modification to object MV60SFS0. As a result of the
modification, the display of both lists is influenced at the same time.
However, the correction is only valid for the billing due list up to and
including Release 4.0B; as of Release 4.5A, the modification in this note
consequently only affects the work list
for invoice lists. To create the function in the billing due
list as of Release 4.5A, refer to Note 139888 or customer function 008
within customer enhancement V60P0001. You can activate this customer enhancement
using Transaction CMOD.
Remark: Note that this modification also affects background processing: If the list is set up without selections, no list entries to be edited can be found during background processing either. Nevertheless, you can use the modification for background processing if you replace the line to be inserted with the following source code:
IF SY-BINPT NE SPACE OR SY-BATCH
NE SPACE.
POSTAB-SELKZ = 'X'.
ELSE.
POSTAB-SELKZ = '_'.
ENDIF.
This note is a modification and will not be included in a Hot Package. Check whether you require the correction described in your system. When you apply a Hot Package, the system may overwrite parts of this correction. Therefore, when applying a Hot Package, make sure that this correction (SPAM/SPAU) is retained unchanged in your system.
Source code corrections
*$*$----------------------------------------------------------------$*$*
*$ Correction instructions : 0120024545
0000000398
$*
*$ Software component
: SAP_APPL SAP Application
$*
*$--------------------------------------------------------------------$*
*$ Validity : 30A
No patches
$*
*$
: 30B No patches
$*
*$
: 30C SAPKH30C01
- SAPKH30C14
$*
*$
: 30D All patches
$*
*$
: 30E SAPKH30E01
- SAPKH30E27
$*
*$
: 30F All patches
$*
*$
: 310 No patches
$*
*$
: 31G SAPKH31G01
- SAPKH31G13
$*
*$
: 31H All patches
$*
*$--------------------------------------------------------------------$*
*$ Changes/objects not contained in standard
SAP system
$*
*$*$----------------------------------------------------------------$*$*
*&---------------------------------------------------------------------*
*& Object
REPS MV50SFS0
*& Object header PROG MV50SFS0
*&---------------------------------------------------------------------*
*& This object has been generated from
an advance correction
*
*& attached to a R/3 note.
*
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Title: Correction A (VL04)
*
*&---------------------------------------------------------------------*
...
FORM SELEKTION_AUSFUEHREN.
...
LOOP AT POSTAB.
POSTAB-ACTIV = '0'.
* POSTAB-SELKZ = 'X'.
"<<<<<< delete note 16711
POSTAB-SELKZ = '_'.
"<<<<<< insert note 16711
POSTAB-ZAEHL = SY-TABIX.
IF NOT ( POSTAB-LIFSP
IS INITIAL ).
POSTAB-SELKZ = 'Z'.
ENDIF.
MODIFY POSTAB.
...
ENDLOOP.
...
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Object
REPS MV60SFS0
*& Object header PROG MV60SFS0
*&---------------------------------------------------------------------*
*& This object has been generated from
an advance correction
*
*& attached to a R/3 note.
*
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Title: Correction B (VF04 until 4.0B/VF24)
*
*&---------------------------------------------------------------------*
...
FORM SELEKTION_AUSFUEHREN.
...
LOOP AT POSTAB.
POSTAB-ACTIV = '0'.
* POSTAB-SELKZ = 'X'.
"<<<<<< delete note 16711
POSTAB-SELKZ = '_'.
"<<<<<< insert note 16711
POSTAB-ZAEHL = SY-TABIX.
IF RV60A-FKART IS
INITIAL.
POSTAB-V_FKART
= POSTAB-FKART.
ELSE.
POSTAB-V_FKART
= RV60A-FKART.
ENDIF.
...
ENDLOOP.
ENDFORM.
...
*$*$----------------------------------------------------------------$*$*
*$ Correction instructions : 0120024545
0000000399
$*
*$ Software component
: SAP_APPL SAP Application
$*
*$--------------------------------------------------------------------$*
*$ Validity : 31I
All patches
$*
*$
: 40A SAPKH40A01
- SAPKH40A25
$*
*$
: 40B All patches
$*
*$
: 45A All patches
$*
*$
: 45B All patches
$*
*$
: 46A All patches
$*
*$
: 46B All patches
$*
*$
: 46C All patches
$*
*$--------------------------------------------------------------------$*
*$ Changes/objects not contained in standard
SAP system
$*
*$*$----------------------------------------------------------------$*$*
*&---------------------------------------------------------------------*
*& Object
REPS MV50SFS0
*& Object header PROG MV50SFS0
*&---------------------------------------------------------------------*
*& This object has been generated from
an advance correction
*
*& attached to a R/3 note.
*
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Title: Correction A (VL04)
*
*&---------------------------------------------------------------------*
...
FORM SELEKTION_AUSFUEHREN.
...
LOOP AT POSTAB.
POSTAB-ACTIV = '0'.
* POSTAB-SELKZ = 'X'.
"<<<<<< delete note 16711
POSTAB-SELKZ = '_'.
"<<<<<< insert note 16711
POSTAB-ZAEHL = SY-TABIX.
IF NOT ( POSTAB-LIFSP
IS INITIAL ).
POSTAB-SELKZ = 'Z'.
ENDIF.
MODIFY POSTAB.
...
ENDLOOP.
...
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Object
REPS MV50SFZC
*& Object header PROG MV50SFZC
*&---------------------------------------------------------------------*
*& This object has been generated from
an advance correction
*
*& attached to a R/3 note.
*
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Title: Correction A (VL04)
*
*&---------------------------------------------------------------------*
FORM ZEILE_AUSGEBEN.
...
IF POSTAB-SELKZ = 'Z'.
SELKZFLAG =
'0'.
* POSTAB-SELKZ = 'X'.
"<<<<<< delete note 16711
POSTAB-SELKZ
= '_'.
"<<<<<< insert note 16711
COLOR = C_GESPERRT.
ENDIF.
IF POSTAB-SELKZ = '*'.
...
...
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Object
REPS MV60SFS0
*& Object header PROG MV60SFS0
*&---------------------------------------------------------------------*
*& This object has been generated from
an advance correction
*
*& attached to a R/3 note.
*
*&---------------------------------------------------------------------*
*&---------------------------------------------------------------------*
*& Title: Correction B (VF04 until 4.0B/VF24)
*
*&---------------------------------------------------------------------*
...
FORM SELEKTION_AUSFUEHREN.
...
LOOP AT POSTAB.
POSTAB-ACTIV = '0'.
* POSTAB-SELKZ = 'X'.
"<<<<<< delete note 16711
POSTAB-SELKZ = '_'.
"<<<<<< insert note 16711
POSTAB-ZAEHL = SY-TABIX.
IF RV60A-FKART IS
INITIAL.
POSTAB-V_FKART
= POSTAB-FKART.
ELSE.
POSTAB-V_FKART
= RV60A-FKART.
ENDIF.
...
ENDLOOP.
ENDFORM.
Return to :-
SAP ABAP/4 Programming, Basis Administration,
Configuration Hints and Tips
(c) www.sap-basis-abap.com All material on this site is
Copyright.
Every effort is made to ensure the content integrity.
Information used on this site is at your own risk.
All product names are trademarks of their respective
companies. The site www.sap-basis-abap.com is in no way affiliated
with SAP AG.
Any unauthorised copying or mirroring is prohibited.